I ran this system for 3 years as an SPS cube on the left and a display fuge on the right.
- 2x 7.5g Mr. Aqua 12"x12"x12" rimless cubes.
- Drilled for 1" drains and 1/2" returns
- Each has a Glass-Holes Nano con Dientes overflow (the best)
- Drains T into a 1 1/2" shared drain
- Return Ts from a 3/4" pump to the two 1/2" return lines
- Flex PVC and black vinyl tubing
- 10g Sump with 3 sections:
- - Drain + skimmer (I ran a Tunze 9004)
- - Large Refugium area (try a WavePoint 6" LED - mass Chaeto growth)
- - Return + heater + ATO + potential nano reactor (I had the Innovative Marine MiniMax)
- Eheim Compact+ 3000 return pump
- Eheim/Ebo Jaeger 50w heater
- JBJ ATO w/two float switches and Aqualifter pump
No parting out. You can use what you want. $250
Second part:
- Solid-wood stand 26x18x34 (with wheels)
- Electrical including:
- - American DJ 8-port switched power unit
- - Two power strips
- - Three timers
- - Sump fan (I ran 150 HQI on the SPS cube and tank never got more than 2 degrees above ambient)
$75
Everything is well used but will clean-up well. No scratches in glass that I've found. Black-painted back has some paint chipped off towards the top.
Stand has some salt water damage that is basically covered by tanks.
SERIOUS BUYERS ONLY. Pickup only. Can do that this weekend or next.
Text (858) eight 3 seven two 9 eight 6
Crappy cell phone pics:
Sump is getting a vinegar soak (probably won't help much - needs scraping). I'll post pics of it back in the stand, along with the pump and heater, when it is done.