I like it. Small, silent, price is ok. It's real cool to see the wave effect hit the corals then pause then hit em again!. I've got mine on a 1260 and turning a Tunze 6080. Lots of oscillated flow!.
|
|
|
I like it. Small, silent, price is ok. It's real cool to see the wave effect hit the corals then pause then hit em again!. I've got mine on a 1260 and turning a Tunze 6080. Lots of oscillated flow!.
Elos 120xl, 90g frag tank, 3x Elos planet 2's 2x 150, 4x 250w hqi's, 12 39w t5's , Moceans, 3x Tunze 6080, jebao rw-15 Zeovit, Korallen zucht S skimmer, Apex, aqua euro 400.
I am considering getting one so it can hit any dead spots I have in my tank.
However, is the flow adjustable and if so, is the max flow basically the output of the return pump?
I was told that it was adjustable but I dont think you can increase the flow more than what the pump can produce. Thanks.
You can't increase flow, unless you toss on an eductor/penductor on the output. To put it simply, the WavySea device is basically a oscillating 90 deg. elbow. I have a WavySea and am EXTREMELY satisfied with it. My only gripe is probably with the controller. It's kinda bulky IMO and they could've done a better job to make it smaller and more compact. Otherwise, it's a very easy "plug-and-play" piece of equipment which is reliable and good at mixing things up.
[I][SIZE="1"][B]Frag More[/B][/SIZE][/I] - [SIZE="1"][URL="www.mag-racks.com"][B]www.mag-racks.com[/B][/URL][/SIZE]
[SIZE="1"]Formerly Uchiha[/SIZE] - [SIZE="1"]125 Cube.[/SIZE]
Cool, thanks Daniel, that will be on my Christmas list, got to convince the g/f it is worthwhile.
how much do these things run?
[SIZE="1"][B][URL="http://www.sdreefs.com/forums/showthread.php?t=12669&page=1"][COLOR="Red"][SIZE="3"][FONT="Palatino Linotype"]>>>C.Maximus<<<[/FONT][/SIZE][/COLOR][/URL][/B][/SIZE]
[SIZE="1"][B][URL="http://www.sdreefs.com/forums/showthread.php?t=73332"][COLOR="Red"][SIZE="3"][FONT="Palatino Linotype"]>>>JCubicus<<<[/FONT][/SIZE][/COLOR][/URL][/B][/SIZE]
[b]
[url=http://www.sdreefs.com/forums/showthread.php?p=384447#post384447][color="Lime"]FIVE-ZERO[/color]/[color="Yellow"]nOnE[/color]/[color="Red"]ZILCH[/color] Feedback[/url][/b]
Clicky click.Originally Posted by WanaLeime
http://www.marinedepot.com/ps_search...avemakers.html
I love mine. I have it hooked up to a mag 12 pump. I am looking to get a tunze attachment to add my 6080. Much better quality than a seaswirl.
I've got 2 on my tank. I did a slight mod. The return runs through them and also have a mj1200 mounted to it. I love em.
[URL="http://www.sdreefs.com/forums/showthread.php?t=13034"]My Tanks[/URL]
[B][url=http://www.sdreefs.com/forums/showthread.php?p=384360#post384360][COLOR="Lime"]0[/COLOR]/[COLOR="Yellow"]0[/COLOR]/[COLOR="Red"]0[/COLOR]Feedback[/url][/B]
Modded MJ1200's? That would be bad-ass... esp if you had them on a wave-maker set to turn on/off every minute or so to pulse some flow.Originally Posted by da6d2003
BTW, I modded mine too but it's not as nice as an MJ1200. I basically drilled a small hole in the plumbing to cut the siphon which decreases backflow into my sump during a black-out or when my return pump fails. Works like a charm!
[I][SIZE="1"][B]Frag More[/B][/SIZE][/I] - [SIZE="1"][URL="www.mag-racks.com"][B]www.mag-racks.com[/B][/URL][/SIZE]
[SIZE="1"]Formerly Uchiha[/SIZE] - [SIZE="1"]125 Cube.[/SIZE]
Originally Posted by Daniel
I didn't mod the 1200's. (they just don't seem to last very long modded) I just attached them below the return and then hooked them to the reefkeeper2's wavemaker and enabled night mode so it calms down at night. Works pretty darn well.
[URL="http://www.sdreefs.com/forums/showthread.php?t=13034"]My Tanks[/URL]
[B][url=http://www.sdreefs.com/forums/showthread.php?p=384360#post384360][COLOR="Lime"]0[/COLOR]/[COLOR="Yellow"]0[/COLOR]/[COLOR="Red"]0[/COLOR]Feedback[/url][/B]
What makes the WavySea Plus different than the WavySea?Originally Posted by Bogg
Some sort of powerhaed bracket?
[I]Let There Be Light[/I]
3600GPH vs 2300GPH max flow-thru rate. + models can be hooked up to pressure-rated pumps.Originally Posted by dj9264
There are currently 1 users browsing this thread. (0 members and 1 guests)