Hey guys
I wanted to share my first time experience removing scratches from an acrylic frag tank I bought. It took me about an hr to comlete the job, the tanks front side and top was completely covered in scratches, minor and some deep ones. I went with the Novus 3 system, highly recommended. I used wet/dry sand papper 800 and 2000, micro fiber cloths, buffer, spray bottle with water and 2 drops of detergent. Tools- Sander, Drill. I spend less than $50 getting everything I needed( Novus, cloths, buffers, sand paper). It is not as hard as it looks, it is very simple and affortable to do yourself. Not bad for my first time, very satisfied. Here are some before and after pics.

Sent from my SM-G920P using Tapatalk