Steel stand cover ideas

[cshplumber]

[QUOTE=Aquamann28;1021250]Well we're not putting tile underneath tank. So I was just going to level area under tank.

What are you thinking of doing? Framing out shape of stand and pour inside?

[cshplumber]

Just make sure whatever you use check full cure time. It's going to quite a heavy load on it.

And see if you can get the stuff with fibers in it to help it bond together. Not sure if it comes with fibers or if you add it in during the mixing process

[Aquamann28]

Well what I'm picturing is a really thin layer. Just enough to level it. Does it need to be thicker than that? I need to look online at what's available.


Sent from my iPhone using Tapatalk

[Aquamann28]

So we put the self leveler down today finally and it sucks it doesn't look like it self leveled itself!!! Seems like it's slightly higher in middle. Doesn't make sense to me it's only a 2' x 12' area and we spread it out but poured it in middle. So I'm not sure what to do. Thinking about still using a thin layer of foam or 1/4" plywood underneath maybe?


Sent from my iPhone using Tapatalk

[seanmcknew]

Unfortunately self level does not self level. I actually pour a ton of self level in the flooring industry. I screed it with a straight edge and let it settle (self level) any imperfections.

Sent from my SM-G935V using Tapatalk

[Aquamann28]

I might need some help fixing this! 😩


Sent from my iPhone using Tapatalk

[Aquamann28]

Sean could you text me?


Sent from my iPhone using Tapatalk

[seanmcknew]

Text me. 6198572225. I'll figure out with you when I can help you out. I might be able to save the current self leveler as I have a flooring Concrete grinder. But I would need to see it know for sure.

Sent from my SM-G935V using Tapatalk

[sushi]

I can't wait to see this tank with water in it!

[Aquamann28]

So I FINALLY got tank in the room today!! I've had a lot of people ask me to do a Tank build strand. Any idea where that's appropriate?


Sent from my iPhone using Tapatalk