So i picked up a 60g cube a while back and decided to start putting it all together.
Here is the stand im making. Maybe a little overkill but i thought "why not". He he
2x3s and 2x4s for frame.
Added a top joist, two bottom joists and the bottom decking.
Decided i didnt want to see 2x material when i open the doors so i started sheathing the interior.
Here is the exterior skinning.
All skinning complete. And i cut out a section for the plumbing.
I like natural looking wood but im going to paint it to protect it. Already applied first coat on interior. I also need to add the corners, top, and bottom trimwork...plus 3 doors. Back will remain open.