Street Elbow for durso drain

[CanhMan]

Hey guys,
I'm building a durso in a tight overflow and would like to get a 1.25 street elbow.
Where can I get one? Last time I was at HD I don't recall seeing them in stock. Is there a specialty plumbing store around SD that carries them?

Thanks!


Sent from my iPhone using Tapatalk

[row12]

Aquatic Warehouse has an impressive plumbing selection. I bought all the plumbing pieces for my setup there. Check them out.

[LotsaFishies]

Do a DIY maggie muffler instead, it will be quieter, fit your space better, and will have the same flow. 1" pipe straight up, then drill several 1/2" or bigger holes all around the top edge of the vertical 1" pipe. Then get a standard 1.5" (or 2" if it will fit) pvc cap and place it on top of the 1" pipe, and drill a tiny airhole through the top of the cap.

[CanhMan]

Thanks guys for the info & advice.
Got to look up that Maggie muffler.


Sent from my iPhone using Tapatalk

[jasonp87]

I use a hofer gurgle buster. Also takes up much less room than the durso. I have a thread here from when I made mine.

http://www.sdreefs.com/forums/showth...-Gurgle-Buster

[CanhMan]

Thanks Jason. That's a good post from a couple years ago.


Sent from my iPhone using Tapatalk