arrggg wires wires everywhere

[Sancho]

[IMG][/IMG]
I need some inspiration. I have all this crap and nowhere to put it. Lets see your apex set ups. I am kinda anal and want it to look clean. I have run out of room under the stand and was looking for a creative and functional way to make all this stuff work.

[jada1]

Make a door with a cabinet to put them in..

[specvjeff]

Dave doesn't have an Apex but his Reef Keeper set up is super clean. I tried but failed.

Jeff Saurwein
SDMAS President
SDReefs Moderator
Sent from my Samsung Galaxy S4 using Tapatalk Pro

[RussM]

http://forum.neptunesystems.com/show...rol-Freakiness

There some other threads in the same subforum with really nicely done mounting.

[unbereefable]

Raceway and Velcro loops. F zip ties. Too much of a pain in the ass when you need to remove something. Or build a separate cabinet for the whole thing. Then mount some drawer slides to the cabinet and mount the cab to the stand. Boom!!! Now the cab can slide back and forth and it can be removed when needed.

[DaveMorris]

You can get some ideas from my current build thread.

http://www.sdreefs.com/forums/showth...o-120g-Upgrade

[acbaldwin]

You can get some ideas from my current build thread.

http://www.sdreefs.com/forums/showth...o-120g-Upgrade

Sheesh, Dave, it's almost like you do this professionally. :P

[Sancho]

Dave's set up is kinda what I am shooting for. I only have one side of stand open. The other side is up against a kitchen island. I am worried about salt creep and moisture. Any ideas for ventilation? Or am I over thinking this?

[Drama D]

This is a members tank on nanoreef forum. Nanotopia.
Just amazing and thought it was worth sharing.

[Bogg]

Pretty faceplates
+1 Danny I just have a cabinet next to the tank I just shove all the wires in
The controlers I have in the drawer to the cabinet and set on top

[Sancho]

This is a members tank on nanoreef forum. Nanotopia.
Just amazing and thought it was worth sharing.

I like that.

[specvjeff]

I may just pick up a cheap tablet after seeing that to keep Fusion up and running on all the time. Better then risking my phone during water changes!

Jeff Saurwein
SDMAS President
SDReefs Moderator
Sent from my Samsung Galaxy S4 using Tapatalk Pro

[EuroDriver]

I recently spent an entire Saturday re-running my wiring, putting everything in wire looms, zip-tying, etc. A couple days later I had to pull my salinity probe out and now half of it is unraveled ...

[CruiseX]

I kept mine as clean as I could. Of course the APEX was the last thing to go in so I was working around this and that. Obviously if you could plan it all out you would do it differently, but here's what I ended up with. I ran out of room underneath my stand, so I used the very top part of the stand, essentially the cieling of the stand. Double sided tape/velcro with screw to keep in place. Zip ties for the rest. Left myself the ability to get at the probes when needed without disturbing everything else.