ok so after reading some more and talking to some people here is what I have come up with.
Option 1. use a meanwell LPF-90D-54 (54v and 1.67a) to power some 3.6v LED with 700-750mA.
-I can run 3 strings (parallel) with 15 LED in each string. that will leave me with 556mA and 54v per string (is running lower amps good?). I can run 45 LED off this driver
Option 2. use a meanwell ELN-60-48D (48v and 1.3a) to power the same LEDs
-I can run 2 strings (parallel) with 13 LED in each string. That will leave me with 650mA and 46.8v per string. I can run 26 LED off this driver.
If this is correct, I can use two ELN drivers and have one power my blues and the other my whites (and some blues too maybe because that a lot of white)
Please let me know if this makes sense and/or if you have any recommendations. I know there are some concerns with running parallel but I will get to that after I get this part figured out. Im sure there are some errors in my options. Gotta take it a step at a time.
As mentioned in my previous posts, I am learning this stuff. Despite the confusion and all, I am having fun trying to figure this out. ha ha. Thanks