Ok I have made some progress - still running into some problems. Posted this is Neptune Community as well, hopefully Russ will come along before bed time....Here is what I posted.
So I am setting up my WXM for the first time. From what I can tell everything is already updated. Both or my pumps have been slaved to the WXM no problem and are currently just running a single mode. Here is the program I have for the first pump:
Set ON
Fallback ON
Set ReefCrst
If Time 08:30 to 11:00 Then ReefCrst
If Time 11:00 to 14:00 Then TidalSwl
If Time 14:00 to 16:00 Then Lagoon
If Time 16:00 to 18:00 Then Nutrient
If Time 18:00 to 21:30 Then ReefCrst
If Time 21:30 to 08:30 Then Night
If FeedA 000 Then Slow
If FeedD 000 Then OFF
When I try and update the outlet, I get the error code:\\ Error: Expected ON or OFF OR PFx //Error: line 9 - If Time 21:30 to 08:30 Then Night
\\ Error: Expected ON or OFF OR PFx //Error: line 10 - If FeedA 000 Then Slow
I am guessing this is because I have not set up a profile for Night and Slow. However, I do not have an option when choosing Night or Slow since there is not one from the drop down.
IS that an indication I don't have everything updated? If not what am I missing????
If I do need to update, do you have to update via wired connection. I am currently set up via a wireless bridge.
Finally, is there a way to set up a Feed profile so that after the Feed the pumps will run Nutrient for say an hour then return back to the profiles above.
Thanks!!