I had an RKL with 2 pc4s that worked together. I bought a RKE head unit and when I plug it in, the RKE does not read any outputs on the pc4. The PC4 and the SL1 just blinks amber and blue respectively. What do I have to do?
|
|
|
|
|
|
Registered User
I had an RKL with 2 pc4s that worked together. I bought a RKE head unit and when I plug it in, the RKE does not read any outputs on the pc4. The PC4 and the SL1 just blinks amber and blue respectively. What do I have to do?
Registered User
My guess is that you have two different firmwares loaded, the RKE probably has a different firmware loaded. Dave morris is the ral expert though
125 gallon Cube:rock:
RKE with 2 PC4's
50 Gallon Sump
25 Gallon Fuge
Full Spectrum LED lighting
Classic Mustang Freak:)
Registered User
And is kind of a PIA to update them, you need to buy a module from DA (Costs about $20) so that you can connect each unit to your computer then you have to download reefkeeper 2.0, then you have to join the DA forums to get to the links and instructions on how to upgrade your firmware. That being said if you follow the instructions carefully it should work fine.
125 gallon Cube:rock:
RKE with 2 PC4's
50 Gallon Sump
25 Gallon Fuge
Full Spectrum LED lighting
Classic Mustang Freak:)
SDMAS Staff Member
The module that Bill is talking about is the Sid
Its all about MTS
Larry
150g, 60 gal sump, G3 Protein Skimmer, 2 Koralia Evo 1400's,2 Koralia Evo 750's, 20g ATO, 3 - 120w LarryM Led's configured 35 - 16000K, 28 - 14000K, 28 453nm blue and 28, 468nm blue.
http://www.sdreefs.com/forums/showthread.php?t=75141
60g cube, 20g sump, Bubble Magus curve 5 skimmer with 2 mp10's and 120w led.
http://www.sdreefs.com/forums/showth...00-60g-upgrade
Registered User
Yeah that thingOriginally Posted by bbandu
125 gallon Cube:rock:
RKE with 2 PC4's
50 Gallon Sump
25 Gallon Fuge
Full Spectrum LED lighting
Classic Mustang Freak:)
Before going through the hassle of updating, simply do a factory reset via the head unit. I had this problem once where only one of my two PC4s was being seen. After a reset, everything worked fine.
50g acrylic w/DIY external O/F box, BeanAnimal Overflow, 2X K 1050's & 1 nano on Wavemaker, wavept retro 4X39w T5HO's (2 actinic/2 12K), 2X12" mixed angle moonlights (ebay), Proflex Model 1 sump w/miracle mud, chaeto, Coralife mini 2X6w T5 (10K/Actinic) fixture, Tunze 9006 skimmer, BRS Carbon reactor, 1/10 HP chiller. Powered by a Mag 9.5 Dosing Bionic 2-part. Scripps Water
Story of My Tank: [URL]http://www.sdreefs.com/forums/showthread.php?t=77273[/URL]
Controller nut
You do not have to buy a SID, unless you no longer have the one that came with your system. Every RKL and RKE system is shipped with a programming SID. Euro is correct…Do a factory reset and it should correct the problem. I would still make sure that you update the firmware on each module just to make sure that it is all the latest. Here is the link to download myReef to program and update modules:
http://www.forum.digitalaquatics.com...hp?f=88&t=7885
Dave
My current 130g system
Got a question about controllers? Ask away...
Digital Aquatics beta tester
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote