Jebao WP-25 and WP-40 Wave Maker Group Buy

[ReefersGarage]

Going to order some more pumps!!!!!!!!!!!!!!!!!!!

78.00 each for the wp40 75.00 each for the wp25. Pm me if you want one 40.00 down (paypal or come by the shop) to secure the pump. Please select friends and family

to make a deposit for the WP40 click on link below
https://www.paypal.com/cgi-bin/websc...=8CDWVS3468RGY
to make deposit on WP25 Click below

https://www.paypal.com/cgi-bin/websc...=C5KFN97LB69FL

[ReefersGarage]

Features WP-25

Easy installation and maintenance.
360 degree rotation on a magnetic bracket
6 different operating modes, including variable pulse modes for wave generation and a Reef Stream mode that generates a random flow pattern similar to that found on a natural reef
Night sensor - automatically detects when tank lights go out and slows the pump.
One-touch feed mode - slows pump for a period of 10 minutes.
High performance, powerful, water flow combined with low energy consumption.
Ceramic shaft for long life and durability
Intelligent control system to generate various wave patterns to suit your tank.
Extra-long cable for ease and comfort of placement, even on larger tanks.
Low voltage, safe, reliable power supply. • Suitable for freshwater and saltwater.


Jebo Modes

Press the 'MODE' button to cycle through the selection of functions.

H1 H2 H3: High, constant, non-variable flow (6500 LPH / 4800L / 3200L)

L: Low, constant, non-variable flow at a third of the speed (3000L)

W1: Short pulses which, when timed correctly will create a back and forth motion and form a gentle standing wave in your tank. Adjust the controller to change the speed of the pulses and vary the size of the wave according to your tank.

S1 to S3 Mode: Based on the W1 Wavebox function provides 100% 75% and 50% Wave

W2 & W3: Pump gradually speeds up and slows down incrementally to create a varied flow pattern. Adjustable to form the wave best suited to your tank.

Else: Reef Stream Mode, a mixed, changing pattern that creates a random flow cycle similar to what you would find in a natural reef.

Feed: Press the 'FEED' button once, the blue '10min' light will illuminate indicating that the pump has been stopped for 10 minutes. When the time has elapsed, the light will go off and the pump will be turned back on. Alternatively, press the 'FEED' button again to start the pump.

Lock: To prevent changes from inadvertently occurring by accidentally knocking the adjustable control knob, press and hold the 'FEED' button for 5 seconds. The red 'LOCK' light will illuminate and the control knob will no longer function. Press and hold the 'LOCK' light for a further 5 seconds to disable this feature.

*Night: When the two-pinned sensor is inserted into the two small plugs on the left-hand side of the control box, Night mode will function automatically. The sensor detects when the tank lights go out and slows the pump to half speed. The 'Sensor' light will illuminate when Night mode is in operation. To disable the Night mode function, remove the sensor from the control box.

* Night mode is a new feature intended for use with low output lighting. The sensor can become damaged when used with high output VHO, HQI and LED lighting systems. Customers use the sensor with high output lighting at their own risk. The sensor is not covered by the manufacturer's warranty if used with high output lighting.

Specifications

Power - 110V to 240V 50/60Hz
Wattage - 8W to 20W depending on the mode
Size - 8cm x 6cm
Magnet Base


Features WP40

Easy installation and maintenance.
360 degree rotation on a magnetic bracket
12 different operating modes, including variable pulse modes for wave generation and a Reef Stream mode that generates a random flow pattern similar to that found on a natural reef
Night sensor - automatically detects when tank lights go out and slows the pump.
One-touch feed mode - slows pump for a period of 10 minutes.
High performance, powerful, water flow combined with low energy consumption.
Ceramic shaft for long life and durability
Intelligent control system to generate various wave patterns to suit your tank.
Extra-long cable for ease and comfort of placement, even on larger tanks.
Low voltage, safe, reliable power supply. • Suitable for freshwater and saltwater.


Jebo Modes

Press the 'MODE' button to cycle through the selection of functions.

H1 H2 H3: High, constant, non-variable flow (13,000 LPH / 9700L / 6500L)

L: Low, constant, non-variable flow at a third of the speed (4,300 LPH)

W1: Short pulses which, when timed correctly will create a back and forth motion and form a gentle standing wave in your tank. Adjust the controller to change the speed of the pulses and vary the size of the wave according to your tank.

S1 to S3 Mode: Based on the W1 Wavebox function provides 100% 75% and 50% Wave

W2 & W3: Pump gradually speeds up and slows down incrementally to create a varied flow pattern. Adjustable to form the wave best suited to your tank.

Else: Reef Stream Mode, a mixed, changing pattern that creates a random flow cycle similar to what you would find in a natural reef.

Feed: Press the 'FEED' button once, the blue '10min' light will illuminate indicating that the pump has been stopped for 10 minutes. When the time has elapsed, the light will go off and the pump will be turned back on. Alternatively, press the 'FEED' button again to start the pump.

Lock: To prevent changes from inadvertently occurring by accidentally knocking the adjustable control knob, press and hold the 'FEED' button for 5 seconds. The red 'LOCK' light will illuminate and the control knob will no longer function. Press and hold the 'LOCK' light for a further 5 seconds to disable this feature.

*Night: When the two-pinned sensor is inserted into the two small plugs on the left-hand side of the control box, Night mode will function automatically. The sensor detects when the tank lights go out and slows the pump to half speed. The 'Sensor' light will illuminate when Night mode is in operation. To disable the Night mode function, remove the sensor from the control box.

* Night mode is a new feature intended for use with low output lighting. The sensor can become damaged when used with high output VHO, HQI and LED lighting systems. Customers use the sensor with high output lighting at their own risk. The sensor is not covered by the manufacturer's warranty if used with high output lighting.

Specifications

Power - 110V to 240V 50/60Hz
Wattage - 12W to 40W depending on the mode
Size - 12cm x 9.4cm
EU/UK/AU/US plug supplied as required
Power cable - 160cm long (extendable) from power source to control box
Pump control cable - 160cm long, from control box to pump (320cm combined cable length)

[cutterx23]

When do we have to pay to get in on this?

[socal619]

Louis can you get the return pumps too? i want a dc-6000

[ReefersGarage]

When do we have to pay to get in on this?

Ordering by Dec 9th

[jason142]

I've read up on these and seen they are sold a couple of different ways so have a few questions. Is this going to have the newer controller and is it going to have the US plug or is it going to come with the adapter for US electrical system?

[ReefersGarage]

Louis can you get the return pumps too? i want a dc-6000

The best i can do on the dc-6000 is 123.00

[ReefersGarage]

US plug new controller

[SteveParkinson]

What size was recommended again for a 150 long (5x2x2), two WP-40's or two WP-25's?

[ReefersGarage]

What size was recommended again for a 150 long (5x2x2), two WP-40's or two WP-25's?

2 wp45

[ReefersGarage]

confirmed deposits

Cyberguy 2 wp25s

[ReefersGarage]

Can also get wp60 and the dc series pumps

[Crisneg]

Down payment sent


Sent from my iPhone using Tapatalk

[ReefersGarage]

Down payment sent


Sent from my iPhone using Tapatalk

Thanks for being apart of the Group Buy!

[ReefersGarage]

confirmed deposits......

Cyberguy 2 wp25s
Crisneg 1 wp 40