!v@n's 100g Rimless Build
Today I made the adapters to mount my lights. I have a pair of AI Sol I’m gonna be using on the tank. I didn’t really like any of the available mounting solutions so I decided to make my own, kind of. I had seen someone on another forum use a computer monitor mounting arm to mount a light over his tank so I ran with that idea and am gonna use a dual monitor arm. I had to make adapters to mount the lights to the standard 100x100mm monitor mounts. Here’s what I came up with. I used a sheet of .090 aluminum and cut it out on my cnc to shape, then bent it to its final shape. I’ll be painting them satin black to match the mount. I think it will be a nice solution and allow me to move the lights back whenever I need to reach in the tank. (The light is taken apart in the picture. I used only the heat sink to get all my dimensions and for mock up)
https://uploads.tapatalk-cdn.com/202...4ae83242eb.jpghttps://uploads.tapatalk-cdn.com/202...64162c895a.jpghttps://uploads.tapatalk-cdn.com/202...6d1bb520ba.jpg
Sent from my iPhone using Tapatalk Pro