Printable View
Easy temp switch and fan controller.
http://uploads.tapatalk-cdn.com/2016...d10d563c80.jpg
12v one of these from Amazon or eBay
http://uploads.tapatalk-cdn.com/2016...c00ac43f8f.jpg
http://uploads.tapatalk-cdn.com/2016...1e7636108f.jpg
http://uploads.tapatalk-cdn.com/2016...1eac473947.jpg
http://uploads.tapatalk-cdn.com/2016...a5420c7058.jpg
Sent from my iPhone using Tapatalk
Works with all the DC fans. If you get a bigger fan get a bigger power adaptor.
FWIW i used a bigger adaptor on this one and it blows like a hurricane
With the AC power version you can add a heater and AC fan up to 20 amps.
Me. I hate AC in the tank when I can avoid it I do and I don't recommend you try it unless your DIY skills are good. Very good.
Sent from my iPhone using Tapatalk
super cool!
nice share
How much
Sent from my SAMSUNG-SM-N920A using Tapatalk
$12 for controller on amazon. fan was 19 and they have larger ones depending on the tank.
Is there splicing that is require or d ends come pre cut for all this?
Cool work, I use those same controllers (120v version) for my chiller and for fermenting beer :thrasher: I didn't know they had 12v versions. I am sure that will be useful some day.
I like the disconnect on the power supply as well. Did the controller come with the power supply?
Oh and I forgot, I am not sure how that probe will hold up in salt water but I replaced it with this one https://www.amazon.com/Yeeco-Waterpr.../dp/B00QTW8FDW
I bought the ends. It's easier to take apart or add length if i need to. That power supply came with tha fan actually. I'm waiting for a large amp 12v supply and splitter so I can run all the 12v stuff off one supply. Same with my 24v. For the power heads and pump. Pretty soon all my tanks will be all dc from 2 power supplies. So no more power strips and AC mess near the tank. The only snag is the heater is AC and the lights are 32v from a driver. Titanium dc heating elements are spendy.
But even with that prob I will only need four AC outlets and two splitters.
The ends come pre cut. Get em on Amazon or eBay You just have to make sure witch way the male and female point. Then you might have to splice. You can also use computer fans and splice an end on them.Quote:
Originally Posted by CMD2213
Whats the brand name for the Fan Temp Chiller controller on Amazon? Link would also help :)
Hey buddy just search for 12v temperature controller there are lots, all the same from ChinaQuote:
Originally Posted by Chet31
https://www.amazon.com/gp/aw/s/ref=i...refix=12v+temp
Curious, are you able to adjust the voltage with a switch on this controller?
ThanksQuote:
Originally Posted by sushi
Sent from my SM-G935V using Tapatalk
no. its pretty bare bones.Quote:
Originally Posted by Drama D
Hot topic bump.
This thing works great, use it on my nano. I do however recommend getting a separate temp probe, the one that comes with the unit failed on me.
Yup. Does happen. I ordered a dozen of the 2 wire probes. ($8) I think I’ve replaced the probe 4-5 times in two tanks over the last 8 years or so. The stock one is pretty weak.
Sent from my iPhone using Tapatalk