Printable View
So I have a 1/2” tube that goes down into a reactor but I wanted to add some kind of small quick connect like a union in order to remove the reactor for servicing if needed. It’s currently connected directly and the area isn’t so big that I can fit a moral 1/2” pvc union so anything like a union but smaller inline that you guys can think of? I’ll post photos later today.
JG push fit coupling is removable.
Might be able to rig something up with this.
https://www.avastmarine.com/collecti...nt=22864460995
You could always get a 1/2 or 1" union and use a bushing to reduce the size. Those jg fitting are legit as well, just put a lil tlf ball valve before it
A regular union won’t fit due to space issue. The JG push fit coupling is nice but I don’t have room to pull the tube down far enough to even remove the tube.
Sorry I didn’t have time to upload any photos but will ASAP.
It would need to be some what of a gasket seal like a union? Where you can unscrew and slide it right off.
https://www.googleadservices.com/pag...BAgPECs&adurl=
Kinda hard to understand what exactly you are trying to do, quick disconnect for reactor for servicing?
https://www.googleadservices.com/pag...BAgMEHo&adurl=