PDA

View Full Version : Frag stand up system



Timmy V.
01-14-2011, 03:05 PM
all the plumbing is there exept a bulkhead and maybe a barb or 2.

this thing is pretty cool but never had time to complete, i'll give a 96w ballast with the bulb never used(50/50)pre-mounted with alum reflector.My original plan was to have the 96w and a dual t-5 on top.

The outside dimensions are 36"wide12"deep,and about 48"high, on a custom fitting stand. The tanks have no serious scratches, and if anything should happen to them they a very cheap to replace and drill yourself.Oh and all the tanks are tied together so you will need a return pump.

Iv had a smaller similar setup running successful before.

60$ with 96w retrofit setup(new 50/50 bulb),2-5g lee's,2-3g lee's tanks, all the plumbing exept just a few small things(i'll update when i get home),and the stand that i built for it.

$60
pm, i'll have pictures when i get home

Timmy V.
01-15-2011, 10:01 PM
buyme

Radman
01-15-2011, 10:07 PM
description is FUZZY... Pics are needed

Timmy V.
01-20-2011, 09:12 AM
its two tanks(5g each)plumbed together, with the same style tanks (3g each) also plumbed together and with a 96w
on top. there ment to bu plumed to the same sump and return, i also have the ball valves for each return.

pics coming...!