benzeeno
03-28-2010, 02:24 PM
I was about to look for magnets.... then decided to try this. I am happy with it. Took about an hour to make. The sheet of acrylic I started out with just happened to be the right size for me 9.5"x 14"x .125".
First I heated it up with a heat gun and formed it over a 2"x 3" board.
Next laid out the holes and center punched them.
Last used a sharp 1/2" drill bit to drill out holes for the plugs.
http://i27.photobucket.com/albums/c174/benzeeno/94d37724.jpg
First I heated it up with a heat gun and formed it over a 2"x 3" board.
Next laid out the holes and center punched them.
Last used a sharp 1/2" drill bit to drill out holes for the plugs.
http://i27.photobucket.com/albums/c174/benzeeno/94d37724.jpg