Breakdown - Highend Equipment List

[JHAI4]

Sold!!!

[Kargawd]

hey Justin! I wish I would of known you were selling Equipment last night, I would of bought the Drew's dosing pumps off of you. I would like to buy them, hook me up! Im racked with work through the weekend, but I might be able to get by in the evening again, if thats kosher with you? LMK.

[fish king]

Thanks Man.

[DiverDave]

What does the RKII come with?

[SDahmer]

I'm interested in the ATO. Does it come with a pump? Also, are you selling the DJ power center?

[NotYouAgain]

Details and photo's coming this afternoon...

Hey Justin,

Where is the location of the bulkhead hole on the sump? Do you have any other pics of the sump with the plumbing attached? I'm getting ready to upgrade to a larger sump and I'm trying to see if this one will work for my application. What size ASM G series skimmer is that in the picture? Where did you have the filter sock positioned in the sump? Are the baffles removable? Sorry for all the questions. Thanks, Ryan.

[DiverDave]

In looking at the pH probe for the RKII, do you have the tip in its sleeve? If the end is not kept wet, the probe becomes useless.

[JHAI4]

Come on, :shocked: are you kidding me! Does this answer your question...

[DiverDave]

Sweet. I'll be home from Iraq in a month or so. If it's still available I'll look you up!
(Sorry about the insult...I could bring you a hooka in trade!)

Dave

[ReefMaster]

PM about MP40w

[om619]

pm sent

[Moon Doggy]

The Poseidon PS3 what are they rated for Thanks in advance

[JHAI4]

The PS3 is silently (less than 30db) pumps 240 gallons per hour at 24 foot head pressure to 720 gallons per hour at 3 foot head pressure through 1 inch male NPT threaded fittings. The latest in materials, including the Noryl housing & impeller, titanium rotor, EPDM high temperature O-ring (to 140F) and carbon graphite/ceramic bearing combine to make a unique leak proof design with line pressures to 50PSI. The pump comes complete with 6ft SJWTA water resistant power cord and features a Run Dry Cutout with thermal switch for safety.

Another unique feature of the Poseidon pumps is the mounting bracket designed to allow the pump be mounted in any of four positions: With the output at a 45 degree angle to the left or right, the output vertical or the output horizontal to the left.

Over all length is 7” long including the threaded inlet port. The pump impeller housing is 4.25” wide. It is 4.5” wide at the wire inlet port. It is 5” tall at the outlet port.

The PS2 and PS3 are pressure pumps and will pump to over 25 feet. The PS1 and PS4 are flow pumps and have a maximum head pressure of 18 feet.

http://www.f3images.com/IMD/aquarium_images/pump_poseidon_ps3_chart.jpg

Let me know if that answers your question.

[JHAI4]

I love these pumps... They are work horses and run very silent.... They do warm the water up a little too, as much as 2-4º, but I liked that as I never had to run a heater.

[JHAI4]

BUMP... Updated List.

[Moon Doggy]

Thanks JHAI4 It sounds like a great pump but I am concerned with the heat issue. So I will have to think about it some more.